How to Assemble a Controller Display Stand

Controller stands consist of your chosen base, along with two sides and one brace piece as shown. Make sure everything is intact before you begin assembling.

The two sides and the brace piece will have the protective film on both sides. The film may be blue, white or clear. Remove all of the film before continuing.

Once all of the components are pealed, hold one of the sides and slot the brace piece into the slot and push it down as shown. Do exactly the same with the second side. So that you end up with the brace piece locked in between the two sides.

Align the feet of the sides up with the holes on the base, starting by slotting the back of the side pieces in, and working your way forward in a rolling motion, until the sides are fully located in the base.

Once you have located the sides in the slots of the base, your controller stand should look like this. If you are having any issues or believe that you have been sent the wrong components do not hesitate to email us at [email protected].